Alph - A Little Process Helper

This is the completed case for part 2 of the Alph Tutorial.

Loading this case into Alph

Browse this page with the web browser on your iPhone. Tap and hold in the gray area below to select the whole region and and then tap the copy button that appears. Run Alph and use the Load Case command to load this case from the paste board.

{
 "SelectedFluidIndex" : 0,
 "PropPkg" : "APRNGL",
 "Tools" : [
   {
     "Type" : "Hydrate",
     "HydrateVariable" : "P",
     "name" : "hydrate",
     "DiagramX" : 21,
     "DiagramY" : 61,
     "Feed" : "feed"
   },
   {
     "Source" : "feed.v",
     "QualityLineSpec" : "1. 0.75 0.5 .95",
     "name" : "envelope",
     "DiagramX" : 27,
     "Type" : "Phase Envelope",
     "DiagramY" : 99,
     "StartPressure" : "500 kPa"
   }
 ],
 "diagramX" : 13,
 "SelectedToolIndex" : 1,
 "Program" : "Alph",
 "NextFluidNumber" : 6,
 "Fluids" : [
   {
     "CompFormula" : "[ 70,20,10,9,8,7,6,5 ]",
     "Retrograde" : false,
     "FlowFormula" : "10 mmscfd",
     "SecondPropFormula" : "4000 kPa",
     "name" : "feed",
     "DiagramX" : 6,
     "TwoLiquids" : false,
     "SumCompForFlow" : false,
     "FirstPropType" : "T",
     "SecondPropType" : "P",
     "DiagramY" : 20,
     "FirstPropFormula" : "10 C"
   }
 ],
 "Hypotheticals" : [],
 "diagramY" : -11,
 "CompoundNames" : [
   "METHANE",
   "ETHANE",
   "PROPANE",
   "n-BUTANE",
   "n-PENTANE",
   "n-HEXANE",
   "n-HEPTANE",
   "n-OCTANE"
 ],
 "Variables" : [],
 "CaseName" : "tutorial2",
 "CurrentUnitSet" : 1,
 "NextVariableNumber" : 4,
 "Version" : 1.101,
 "diagramScale" : 1,
 "DisplayedProperties" : {
   "-4" : "y",
   "8" : "y",
   "-2" : "y",
   "-1" : "y",
   "10001" : "y",
   "-6" : "y",
   "9" : "y"
 }
}